Payment & Shipping Terms:
|Product Name:||Hydraulic Static Pile Driver||Max Driving Force:||2000KN|
|Rated Piling Pressure:||2000KN||Piling Stroke:||1.9m|
|Piling Speed:||11m/min||Max Square Pile Size:||￠500mm|
|Max Circle Pile Size:||□450mm|
hydraulic pile driving machine,
construction piling machine
T-works Robot Machine 200 ton Hydraulic Piling Machine with Fast Piling Speed
Hydraulic Static Pile Drivers are featured with no noise, no vibration, no pollution and no rubbish left in construction site.It can work with H-piles, precast concrete and steel piles with different shapes,like round,square and tapered shape. There are series models range from 60T to 1200T.
It is adopted the hydraulic system design of large power and high flow,the precast pile entirely depends on the hydraulic static pressure so that the pile can be pressed into the ground steadily and quietly.
The pressing-pile speed amounting to 300-800 meters within 8hours, which it's quite more efficient than other conventional pile drivers.This unique construction method with non-pollution has gradually taken place of the pile hammer.
No limitation on pile length. Suitable for construction in clay soil, soft soil and sand bed foundation, or in the Karst areas with low earth covering, or by riversides, or in coastal areas with deep bearing stratum.
No noise, No pollution during construction, especially suitable for operations in areas with noise control such as schools, social communities, and urban areas.
No vibrations. Suitable for vibration-control areas such as subways, overpass, dangerous buildings, precision instrument buildings and those nearby banks.
|Rate piling pressure(KN)||2000|
|Corner piling space(mm)||900|
|Pile hanging length(m)||12|
|Main dimension(m)||Work length||9.9|
4, Feature Advantage:
Except for the general technology performances of the same grade products by domestic HSPD manufacturer, T-works pile driver is of yet some unique original technologies as follows.
1. Unique top-jacking design. Tali HSPD can be applied by not only clamping but also jacking or the two simultaneously. This mode can reduce the clamping stress effectively to avoid damaging the hull, especially of the thin-well pipe piles.
2. Original structure design of lifting leg. This features has changed the supporter of radial force from the lifting cylinder of pile driver during longitudinal walking. By this way, it is possible to avoid the damage of the lifting cylinder rod and the guide thimble, improving resistance to strain injury, impulsion, and weariness greatly.
3. Practical clamping mechanism. It can meet the needs of square pile, pipe pile and H-type steel pile only by changing the grippers. The grippers can adjust its orientation according to the pile surface to ensure enough contact to the pile, and to avoid pile damage.
4. Ingenious conception in the design of the border and corner pile mechanism. The border and corner piling force can reach 60%-70% of center piling force.
5, Basic Structure Of Hydraulic Press In Pile Driver
Contact Person: Ruby